Customization: | Available |
---|---|
Type: | Stainless Steel Sheets |
Standard: | ASTM, AISI, GB, JIS, DIN, EN |
Still deciding? Get samples of US$ 0/Piece
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
PRODUCT NAME | high tensile 904l No.1finish stainless steel plates | |
GRADE | 201 / 202 / 301 / 302 / 304 / 304L / 305 / 309 / 310s / 316 / 316L 409 / 409L / 410 / 410L / 430 /904L |
|
SURFACE FINISH | NO.1 | |
SURFACE PROTECTION | Paper Or PVC | |
MATERIAL STANDARDS | ASTM /BV /AISI/GB /EN /JIS | |
HOT ROLLED | Width | 1000~2000mm |
Length | 2000~6000mm | |
Thickness | 3.00~60mm | |
Normal Size | 1500*6000/ 1800*6000/2000*6000mm | |
Finish | No.1 | |
BRAND | TISCO,JISCO,LISCO,BAO STEEL | |
MEASURING WEIGHT | By Theory Or Actual Weight | |
APPLICATION | Construction,Petroleum&Chemical,Electricity,Food processing,Medical,Machinery,Hardware etc |
FINISH | DEFINITION | APPLICATION |
BA | By heat treatment after cold rolling. | Kitchen utensils, Electric equipment, Building construction. |
2B | Cold rolling, then heat treatment,lastly by cold rolling | Medical equipment, Food industry, Construction material, Kitchen utensils. |
HL | Hair Line | Building Construction. |
NO.1 | By heat treatment,then pickling or processes corresponding. | Chemical tank, pipe. |
NO.4 | By polishing with No.150 to No.180 abrasives specified in JIS R6001. | Kitchen utensils, Building construction, Medical equipment. |
NO.3 | By polishing with No.100 to No.120 abrasives specified in JIS R6001. | Kitchen utensils, Building construction. |
STEEL GRADE | DENSITY(g/cm3) |
304 / 304L / 305 / 321 | 7.93 |
201 / 202 / 301 / 302 | |
316 / 316L / 347 | 7.98 |
309S / 310S | |
405 / 410 / 420 | 7.75 |
409 / 430 / 434 | 7.7 |
904L | 8 |
Grade | C (Max) |
Mn (Max) |
P (Max) |
S (Max) |
Si (Max) |
Cr (Max) |
Ni (Max) |
Mo (Max) |
Cu/Other (Max) |
201 | 0.15 | 5.50~7.50 | 0.060 | 0.03 | 1.00 | 16.00~18.00 | 1.0~3.50 | - | - |
202 | 0.15 | 7.5~10.00 | 0.060 | 0.03 | 1.00 | 17.00- | 4.0~6.0 | ||
301 | 0.15 | 2.00 | 2.00 | 0.03 | 1.00 | 16.00~18 | 6.00~8.00 | ||
304 | 0.08 | 2.00 | 0.045 | 0.03 | 1.00 | 18.00~20.00 | 8.00~10.00 | - | - |
304L | 0.03 | 2.00 | 0.045 | 003 | 1.00 | 18.00~20.00 | 8.00~11.00 | - | - |
310S | 0.08 | 2.00 | 0.045 | 0.03 | 1.5 | 24.00~26.00 | 19.00~22.00 | - | - |
316L | 0.03 | 2.00 | 0.045 | 0.03 | 1.00 | 16.00~18.00 | 10.00~14.00 | 2.00~3.00 | - |
317 | 0.08 | 2.00 | 0.045 | 0.03 | 0.75 | 18.00~20.00 | 11.00~14.00 | 3.00~4.00 | - |
409 | 0.08 | 1.00 | 0.045 | 0.03 | 1.00 | 10.5~11.75 | 0.50 | - | - |
409L | 0.03 | 1.00 | 0.04 | 0.02 | 1.00 | 10.5~11.7 | - | - | - |
410 | 0.15 | 1.00 | 0.035 | 0.03 | 0.50 | 11.5~13.00 | - | - | - |
410L | 0.03 | 1.00 | 0.035 | 0.03 | 1.00 | 11.00~13.00 | - | - | - |
904L | 0.020 | 2.0 | 0.045 | 0.035 | 0.45 | 19~23 | 23~28 | 4.0~5.0 | 1.0~2.0 |
Mechanical Properties | Value |
Tensile Strength σb (MPa) | ≥ 520 |
Conditions Yield Strength σ0.2 (MPa) | ≥ 205 |
Elongation δ5 (%) | ≥ 40 |
Section Shrinkage ψ(%) | ≥ 60 |
Hardness | ≤ 187HB ;≤ 90HRB ; ≤ 200 HV |